GPS-Sport ForenRun.GPS HardwareGPS connection problem with HTC Diamond?
Bitte einloggen, um neue Kommentare zu erstellen Foren durchsuchen
Erste Seite<Seite2von2>Letzte Seite
Tom 24.07.2008 17:30:43 UTC



Thanks for your fast testing!

We will publish 2.2.6 Build 1158 now (will be available for download in about 1/2 hour from now) because we received several positive responses.

user_1788104370 24.07.2008 16:20:04 UTC geändert am 24.07.2008 16:20:25 UTC

I think problem is now FIXED

I started program twice and it seems that "GPS not connecting when application is started" -problem fixed with new RunGPS_UV_EN_build_1158! Hope so...
Tom 24.07.2008 13:15:36 UTC



Maybe the GPS needs some time to come up.
Möglicherweise braucht das GPS Zeit um hochzufahren.

Please try out the modified Run.GPS 2.2.6 test release build 1158 with very insistent GPS initialization:
http://downloads.rungps.net/Setup_RunGPS_UV_EN_build_1158.exe

Bitte probiert mal das modifizierte Test-Release 2.2.6 build 1158 mit sehr hartnäckiger GPS-Initialisierung:
http://downloads.rungps.net/Setup_RunGPS_UV_DE_build_1158.exe



andi22 24.07.2008 12:33:08 UTC geändert am 24.07.2008 12:33:56 UTC



hallo,

ich schreib mal in deutsch.
Zunächst einmal habe ich bei meinem Diamond COM4 und Baudrate 19200 eingestellt, funktioniert hervorragend.
Mit der GPS Connection gibt es bei mir nur ein Phänomen. Ich habe den automatiscen Start der GPS-Verbindung ausgestellt. Wenn ich dann nach dem Start der Software die Verbindung manuel starte, gibt er beim ersten Versuch immr eine Fehlermeldung ("keine Verbindung" oder ähnlich), nach dem zweiten Versuch verbindet er dann problemlos. Stört mich soweit nicht, muss man aber wissen.
Tom 24.07.2008 12:21:20 UTC

GPS connection problem with HTC Diamond?

As described in forum http://www.gps-sport.net/forums/thread/469-0/HTC-Touch-Diamond---no-altitude!, you must configure your Run.GPS on the Diamond to connect to COM4 with a baud rate of 4800. If you use "Windows managed GPS", this will also work, but you will get no altitudes.

One customer of ours recently stated that if you setup the connection for COM4@4800, the automatic GPS connection on program startup will not work correctly (setting "auto-connect on startup" in GPS settings). If you turn on your device and then start Run.GPS, the GPS connection will NOT open automatically. If you just quit Run.GPS and then start again, it does work though.

Does any of you experience the same? Any solutions?

Erste Seite<Seite2von2>Letzte Seite
© 2024 | Impressum | Allgemeine Geschäftsbedingungen | Nutzungsbedigungen | Datenschutzerklärung | Widerruf und Rücksendung | Batterieentsorgung