I have just HARD RESET my diamond, re-installed Run.GPS, setup my RUN.GPS as you speicified and now GPS instantly finds satellites, even sitting indoors.
I read on another forum that a hard reset will sort your GPS out if it gets into problems, only problem with that is I have to re-install everything now.
But now I am getting more accurate readings and altitude in Run.GPS.
I noticed that Windows managed GPS finds satellites faster than manually configured. So, you have to wait little longer when use manual configuration...
As I said in my thread I have tried everything including this, when I uncheck windows managed in the GPS setup on Run.GPS, then set manually to COM4 and the baudrates suggested, the GPS never connects, just sits searching for ever.
Then if I switch back to windows managed, instant GPS location, yet still no altitude...
I have just started using my HTC Diamond with RunGPS, the latest version 2.2.6
Applications loads perfectly quick, finds GPS fix almost instantly and records fine except it won't record Altitude at all.
See my latest run
Distance: 8.41 km (5.23 mi)
Date/Time: 19-Aug-2008 15:58:00
Duration: 0.01:11:58
Active Time: 0.00:58:24
Total Average Speed: 7.01 km/h (4.36 mph)
Active Average Speed: 8.64 km/h (5.37 mph)
Calories: 880 kcal
Min Altitude: 0 m (0 ft)
Max Altitude: 0 m (0 ft)
Ascent: 0 m (0 ft)
Descent: 0 m (0 ft)
Tengo una HTC Diamond y no consigo que aparezca la altitu, hay alguna solución.
Gracias.
________________________________________________________________________
I have a HTC Diamond and can not bring up the altitu, there is some solution.