GPS-Sport ForenRun.GPS HardwareFRWD B600
Bitte einloggen, um neue Kommentare zu erstellen Foren durchsuchen
Erste Seite<Seite1von1>Letzte Seite
admin786557 10.06.2013 10:34:09 UTC



We are very sorry but we do not have a solution for this right now. The Android release of Run.GPS does not support external Bluetooth based GPS mice. Also, we have the FRWD device here and we think that its GPS module is very weak compared to modern GPS devices.

On Windows Mobile 6.5 it *should* work as you describe it. I have tried it and it works for me on HTC HD. I think you have to set it up as GPS provider only in Run.GPS and it will automatically use the heart rate data coming from the device.

koszu 09.06.2013 17:55:23 UTC

Any solution?

I tried HTC HD2 with windows 6.5 - the same problem. FRWD works as GPS or HRM, but both at one time not.
No I have Galaxy Note 2 (Android 4.1.2) - problem is the same as described below.
Any help appreciated.
koszu 19.04.2013 09:15:13 UTC



I know that frwd is really old piece of hardware, but I'm ultramarathon runner and I need something what I can use even 50 hours without charging (just changing bateries).
I have Galaxy SII with android 4.04 and I have a problem to use it as GPS and Heart Rate monitor at one time. In the manual I could read that If I will use FRWD as GPS heartrate will be connected automatically.
The problem is that most of phones have bulit in gps and the driver is built in the android core.
To connect frwd as gps, I turn of gps from android system setting (I understand that it turn off internal GPS) and connect frwd as bluetooth device. But when I start RunGPS I receive message that GPS is turned off and I can't get fix and heart rate is not connected as well. Temperature and barometer data are not visible too.

I have isntalled Bluetooth GPS provider (mobile-j.de) and in android hardware optios checked "allow mock locations", frwd works fine as gps insted of turning off gps in android settings but frwd heart rate monitor is not connected and I can't to connect it manually (connection failed message when I try to connect it manually). Temperature and barometer data are not visible too.

When I connect heart rate monitor at rungps start iw works fine (including temperature and barometer data) but I have to use internal gps then.
Appreciate your help in advance.
Erste Seite<Seite1von1>Letzte Seite
© 2024 | Impressum | Allgemeine Geschäftsbedingungen | Nutzungsbedigungen | Datenschutzerklärung | Widerruf und Rücksendung | Batterieentsorgung