GPS-Sport ForenRun.GPS SoftwareHow to use Indoor Mode?
Bitte einloggen, um neue Kommentare zu erstellen Foren durchsuchen
Erste Seite<Seite1von1>Letzte Seite
admin 11.03.2016 10:10:40 UTC



Yes, right, SENSORS :-)
Slogfester 11.03.2016 06:24:04 UTC



Do you mean:

1) Select Configuration >> SENSORS >> Use sensor values instead of GPS values for speed and distance

??
admin 14.01.2016 11:26:38 UTC



Yes, you can use it to record an indoor cycling session.

If you have a cadence sensor for your indoor bike:
1) Select Configuration >> GPS >> Use sensor values instead of GPS values for speed and distance
2) Switch to indoor mode
3) Start, the Stop, then Upload

If you don't have a cadence sensor for your indoor bike:
1) Connect your heart rate monitor (if available)
2) Switch to indoor mode
3) Press Start, do your training, the press Stop
4) Click on the Run.GPS logo between the Start and Stop buttons
5) Select "Edit distance" and manually enter a distance
6) Upload to GPS-Sport.net

Here's a test / sample of how it will look like on the portal: http://www.gps-sport.net/trainings/spinning_1783168

pdo65 13.01.2016 14:26:40 UTC geändert am 13.01.2016 14:35:22 UTC



Can I register a workout also by using the indoor mode for a spinning / indoorcycling group lesson?
.... And how should this be used then for this activity?

I do not use a smartwatch but only Run.GPS on the smartphone.


Regards
Erste Seite<Seite1von1>Letzte Seite
© 2024 | Impressum | Allgemeine Geschäftsbedingungen | Nutzungsbedigungen | Datenschutzerklärung | Widerruf und Rücksendung | Batterieentsorgung